
The Catalogue
Windows
Frames, glass, and the hardware that operates them — displayed in San Jose, where you can slide a sash and feel the difference before it's in twelve openings.
Our Brands
Windows Brands We Carry
What We Offer
Types of Windows
Sliding, double-hung, casement and picture units, in vinyl, fiberglass and aluminum — fitted to the opening rather than chosen from a chart.
Sliding Windows
Single & Double-Hung Windows
Casement Windows
Picture & Bay Windows
Vinyl Windows
Fiberglass & Aluminum WindowsAbout Windows
The frame matters as much as the glass
A window is a frame material, a glass package, and a way of opening — and each of the three changes how the window performs, how long it lasts, and what it costs to run. Knowing the difference makes the rest of the decision straightforward.
Frame Materials
Vinyl
The most widely specified frame material, offering strong thermal performance and low maintenance at an accessible price point, in a range of factory-applied colors.
Fiberglass
A rigid, dimensionally stable material that expands and contracts very little with temperature, allowing slim sightlines and a long service life.
Aluminum
A traditional cabinet structure with a face frame at the front of the box, offering a substantial look and a wide range of door styles.
Wood & Clad
Natural wood interiors paired with a protective exterior cladding, chosen where the interior finish of the window matters as much as its performance. (Confirm you carry this — remove if not.)
What to Consider
Energy Performance
California's Title 24 requirements set minimum efficiency standards for replacement windows. U-factor and Solar Heat Gain Coefficient are the two numbers that matter, and the right combination depends on which direction your windows face.
Operation
Sliding, single-hung, casement, awning, or fixed — how a window opens affects ventilation, cleaning access, egress compliance in bedrooms, and how much of the view is interrupted by frame.
Noise & Comfort
Glass thickness, air gaps, and laminated options all reduce sound transmission — worth considering for homes near a busy road or under a flight path.
Retrofit or Full-Frame
A retrofit installs a new window into the existing frame; a full-frame replacement removes everything back to the opening. Which suits your home depends on the condition of the existing frames, and it's the largest single factor in the cost.
Frame materials, glass packages, performance ratings, and available options vary by brand and collection.
Style & Performance
Chosen for the room they're in
Beyond the frame material, the style, color, and glass package all shape how a window looks from the street, how much light it brings in, and how the room feels through a summer afternoon.
Window Styles
How it opens
Sliding, single-hung, casement, awning, picture, bay and bow — each suits a different room, opening size, and ventilation need, and the choice changes the character of the elevation as much as the interior.
Frame & Finishes
Inside and out
Frame colors and finishes in whites, warm neutrals, bronzes, and blacks — with the option to specify a different interior and exterior color so the window suits both the room and the facade.
Glass & Performance
The part you don't see
Low-E coatings, dual and triple glazing, argon fill, laminated and tempered options — the glass package is where most of a window's efficiency, comfort, and noise reduction is decided.
Not sure what your openings need? Tell us which way the room faces and how old the frames are — we'll narrow it down in the showroom.
In the Showroom
Operate them before you order them
Full-size window units on display, so you can work the lock, slide the sash, and see the sightline at actual scale.
Visit Us
See it in person.
Everything we carry is on the showroom in San Jose — come compare it in person.
Contact
Hours
- Mon – Fri9:00 am – 5:30 pm
- Sat10:00 am – 5:00 pm
- SunClosed
Request a Quote
Tell us about your project.
Bring your measurements or just your ideas. Our team is on the floor to walk you through it.
We asked them to quote on a hardwood floor installation. Although I am reasonably experienced with home projects, this was outside of my comfort zone. To make sure, we asked them to come to the house, measure the area correctly and make sure there is a plan for the project. The estimate was about 10k and we accepted. Well, they forgot to charge for the glue - add $850. Oh, the preexisting tiles are sitting in 2" of mortar. That happens sometimes, they said. They could have looked at the subfloor easily to see that, but they did not ... add $4k for additional demo work and new raised subfloor. And the flooring of the house is not even so we have to put transitions in; I was able to persuade them to raise the new subfloor and level things off after a bunch of discussions on how this was too much work, but it required a lengthy discussion. Well, next was that they miscalculated the area ... need to add more hardwood floor material and installation charge ... add $1.7k. And when it came to installing the last transitions to the adjacent rooms, I was told that the material they ordered would not work and they did not have time to get other items and finish it (they said I should finish it myself). Along they way they nicked into my walls many times and left a bunch of black marks. Yes, they offered to repaint, but I kind of lost confidence and considered what may go wrong when their floor installer who does not have time to do his main job would start painting my walls. The small discount they offered me did not make things right. Other than that, it was a wonderful experience ...
— Stefan G. · Homeowner
Begin Here
Ready to Design Your Dream Space?
Bring your measurements, inspiration photos, or just your ideas — we'll take it from there.
Newsletter
Stay in the Loop
Subscribe to receive the latest design inspiration, exclusive promotions, new product updates, and remodeling tips from KiLAND Design Center.
















